I’ve recently had a chance to do a photoshoot of this widebody conversion kit by WarpZone New Age Customs on a Nissan Sentra Series 2. This is one extreme conversion right here! I wasn’t able to measure it exactly but it seemed to me that they expanded it by at least 3 inches on each side. Talk about track width!
See the rest of the photos and the full article on the jump.
Up front it looks like the retain the stock Nissan fog lamp cluster. And with the size of the gaping hole in the form of a huge air dam, I’m pretty sure this was made in lieu of an intercooler for a turbo system under the hood.
From this angle, you’ll see the rest of the body kit. You’ll see how the front bumper merges with the extended fender and side skirt. And the added effect of the Lamborghini doors puts the “C” in Customized.
Notice how much the side skirts protrude out of the body. And with proper ducting, I think that air inlet before the rear tire can be used to cool the rear brakes, that is, if this kit will be used for extreme track duties.
Wide body kits also allow you to run larger wheels and a more aggressive stance. These 18-inch Axis wheels suit the car nicely, and is wrapped in 235/40R18 rubber. Also notice the spacers extending the wheels outboard of its original mounting point.
Inside, the interior pieces have been color-matched with the outside paint scheme. The one-piece bucket seats also add to the racy feel, so does the racing steering wheel and shift knob. Also notice the pillar-mounted gauge pods.
The trunk still shows the bare essentials necessary to drive this car on a daily basis. The tool kit and spare tire have been covered in plexiglass for a clean showcar finish.
The GA16DE, 1.6L Twin Cam 16-Valve has been painted in red as an accent, not the custom shiny reflections painted onto the valve cover as well.
So tell us what you think about this New Age Custom conversion? Share your thoughts on the comments below.
Actually Sir this is a B13 model (B14 the next model after..) just like what other hot Nissans code are like S14′s or BNR32 GTRs etc. Liked the car huh!!… so where is the SR20?
those bumpers would definitely need those intercooler, and the wide stance would use some more omph coming for the engine. It’s nice! maybe except for the cheesy fake brembo caliper covers, that kinda riced it another level.
Yeah I agree. I think the car could use a bit more “Go” to match the “Show”.
Zure blog oso interesgarria. bezala eduki behar izan naiz informazio hori bilatzen eta azkenean lortu dira nahi nuke. Eskerrik asko.
Interesting blog. It would be great if you can provide more details about it. Thanks you
Spitze Design hat dieser Blog. Woher hast du die Vorlage ? War bestimmt sehr teuer.
definitely a RICER
All Rice..
Ricer spotter!
Pingback: http://%/bvwweeu
“BEWARE OF USERS!!!!!!!!”
by abc drift
Hi there! My name is Dexter Lim and i personally designed and fabricated the kit myself in our garage and i own this widebody B13… Actually the owner of Warpzone is my friend and i actually let them use my car to add to their entry with the carshows they joined.
1st of all when i started doing this project the real intent was to showcase my skills in designing and fabricating an agressive and functional Wide body kit. Since I am a “Thesis of the year” graduate of Architecture in UST, using my artistic talent and drawing skils using Autocadd, I have created this kit of mine from scratch which i studied well for years before actually finishing the kit…
In short what’s the point of tuning? From the last time i heard tuning is about putting your mind into something and in our world cars, trying to improve whatever OEM part you want to upgrade and hopefully reaching your goal. ( Having the idea that nothing goes well at 1st) Im not saying that my creation is perfect but with the time, money & effort ive spent,i have tuned this car of mine with hardwork and not just pay people to do it for me… The point in tuning is trying to improve what you can with the current car you have. And its just sad when u see people point out and say who’s ricer or who’s not, from what ive researched BOMEX, VEILSIDE and other successful tuning shops started this way and in my case i concentrated with the bodykit 1st and the airbrush paint, coz both i and my friend Mike San Juan personally airbrushed this car. I am actually inspired by Chip Foose who designs cars and eventually fabricates them. And my love for widebody cars just went all out with this car of mine, its just funny that when people see an ordinary car tuned then they say its ricer but when its an OEM sportscar then its ok? Then what’s the deal with carshows anyways, why showcase talent? why showcase the possibilities on how to create something from your imagination? When i built this project i know i cant please everybody, but all i know is i have the heart & passion to tune this car of mine from its stock form to its current state now. Coz if all we can say is, who has the right to be tuned or not or say who’s ricer & who’s not.. then lets just al buy exotic cars so that no one would bash on somebody’s idea and hardwork.
And for the record , im not supposed to say this but after the bodywork & paint this project car of mine has plans to buy a half cut Xtrail GT, Get the SR20VET engine and do the engine swap to match this widebody B13. Put a masive intercooler to the airdam which i designed specifically for that (that’s the reason why my plate is inside the big opening airdam coz i have no intercooler yet). Change the suspension, exhaust & brakes to complete the project. (i only used the fancy caliper covers to save time instead of repainting the whole caliper, and my intent was to show that the wheel i installed can accomodate a bigger brake disk diameter with massive calipers that i plan to put in the future) Im just not Mr. Rich guy that can buy everything all at the same time. Im not born with rich parents to buy me and Evo or a skyline all i have is a 1600 B13 that i transformed with the talent & skills that i have and hopefully create something that is unique. So to all the haters, im sorry if u think my project car is a ricer all i can say is i love tuning even if my resources are limited, well at least my car has Won several Best of show, best in Bodykit & best in paint awards with its current state. And not just receiving “Ricer” comments from the judges. Well at least im doing something that i love and its good for you if you guys are driving Sportscars so you wont receive ricer comments like i do. Tuning is not about who has the fastest car but its the passion of improving stock form & modifying something to create something unique… Dont worry ill try to finish my project soon and hope not receive hater comments next time, God bless!
Nice work dude! Thanks for pointing that out. I personally have no intentions of giving “rice” comments. As I was trying to say in the article, these mods look like they’re in preparation for more mods to come, and am looking forward to see the “go” to match the “show”. Do reach out to us regarding updates on your ride. Cheers bro! More power!
Dont worry bro, i wasnt pointing at u but with the other comments here, people who just want to hate. Anyways if you need more info about my car just send me a PM or anything. And BTW this car was just borrowed by Warpzone and wasnt created by them, its all made by me under my shops name (ADLim Designs) if you guys are interested in customizing ur car just hit me up. Oh and 1 last thing u werent able to take a pic of the custom gastank i did for this car, if u have other pics of the car u wont see my gastank cover at the sides anymore so i can have a smoother flaring at the left rear side of my car… its somewhere else (hidden) my left rear brake light pops open for gas filling…God bless!
Now thats what i call CUSTOMIZED! Ive seen this car before at the Fort “FAST & FURIOUS car show” with other b13s and this really stood out from the rest… good thing the owner cleared out his plans so as not to receive hate comments. Cant wait for this car to have the engine transplant.. The bodykit is sick… Good job!
i saw nissan 13b bodykit. i did look not match nissan sentra front bumper. i think he was own idea cover name not real cut create bodykit some little cut body shape. it (cursing deleted – admin) online . where is sale bodykit or wide bodykit b13 ?
Pingback: what does RICE mean? [continued] - Page 57 - Tsikot Philippines 2011
fried rice, pop rice, white rice, steam rice!
ha-ha!
Dapat nilagyan mo pa ng 2fast 2furious or need for speed underground na visor sticker o kaya west, tanabe etc. yung chrome vinyl sticko para stage 3 na yung dating! for me its not rice. its nice
unique vinyl stage 3, with mantis bomex body kit.. sayang walang dual gt wing, 5 stars na po respect points nyan. lapit na sa final racing stage yan.
I can definitely say that this car “IS NOT A RICER” — It’s not just yet finished, I managed to talk to the owner, and his plans, well it’s not very common, it’s definitely unique.
I’m currently active on attending carshow events, and for the past few years.
This SUPER SENTRA GT
Won best of show couple of times already at various carshow events, you could really see that it fits the “WINNING TITLE”
The stance, and it’s very unique~ What could you say about that? I think the owner designed the bodykit himself.
At the END OF THE DAY, you can’t please anyone, haters will hate… JUST KEEP DOING WHAT YOU’RE DOING~!!!!
Good luck~
This is still an unfinished project… Dami kasing hilig ng owner…. from shoe collection to car restoration… For the people you said that this is a ricer, well opinion nyo yan… However sana before you say something, no the story muna….
– just my 2 cents. I know the owner very well and he’s good on setting up cars, lalo sa mga body kits… personalized design nya yan eh… MR. Dexter Lim is an architecture grad in UST and finished a thesis of the year award when he graduated. Napaka OC nyan, ilang beses ni remold yang body kits nyan kaya inabot ng taon bago masali sa mga show… pinilit nga lang isali sa first bumper to bumper yan kahit di pa tapos ang set up ng oto… As of now I know he’s looking for this very rare engine not sure of the exact model pero, ang alam ko ka level ng skyline un… I’m not good with details… What I’m pointing out is, if he only have the enough resources like money na kagaya ng mga bigtime people dito… It will take no time para matapos yang project car na yan… I 4 4 wheel drive kasi nya yan, at medyo malaki magagastos…
peace!!! don’t hate educate… 
so for the haters, keep hatin, coz you won’t have the life he’s having…. kayo na may malakas na makina… hehehe puro engine power adbot driver naman….